FAQs

Brushing and flossing help control the plaque and bacteria that cause dental disease.

Plaque is a film of food debris, bacteria, and saliva that sticks to the teeth and gums.  The bacteria in plaque convert certain food particles into acids that cause tooth decay.  Also, if plaque is not removed, it turns into calculus (tartar).  If plaque and calculus are not removed, they begin to destroy the gums and bone, causing periodontal (gum) disease.

Plaque formation and growth is continuous and can only be controlled by regular brushing, flossing, and the use of other dental aids.

Toothbrushing – Brush your teeth at least twice a day (especially before going to bed at night) with an ADA approved soft bristle brush and toothpaste.

• Brush at a 45 degree angle to the gums, gently using a small, circular motion, ensuring that you always feel the bristles on the gums.
• Brush the outer, inner, and biting surfaces of each tooth.
• Use the tip of the brush head to clean the inside front teeth.
• Brush your tongue to remove bacteria and to freshen your breath.

Electric toothbrushes are also recommended.  They are easy to use and can remove plaque efficiently.  Simply place the bristles of the electric brush on your gums and teeth and allow the brush to do its job, several teeth at a time.

Flossing – Daily flossing is the best way to clean between the teeth and under the gumline.  Flossing not only helps clean these spaces, it disrupts plaque colonies from building up, preventing damage to the gums, teeth, and bone.

• Take 12-16 inches (30-40cm) of dental floss and wrap it around your middle fingers, leaving about 2 inches (5cm) of floss between the hands.
• Using your thumbs and forefingers to guide the floss, gently insert the floss between teeth using a sawing motion.
• Curve the floss into a “C” shape around each tooth and under the gumline.  Gently move the floss up and down, cleaning the side of each tooth.

Floss holders are recommended if you have difficulty using conventional floss.

Rinsing – It is important to rinse your mouth with water after brushing, and also after meals if you are unable to brush.  If you are using an over-the-counter product for rinsing, it’s a good idea to consult with your dentist or dental hygienist on its appropriateness for you.

Brushing our teeth removes food particles, plaque, and bacteria from all tooth surfaces, except in between the teeth.  Unfortunately, our toothbrush can’t reach these areas that are highly susceptible to decay and periodontal (gum) disease.

Daily flossing is the best way to clean between the teeth and under the gumline.  Flossing not only helps clean these spaces, it disrupts plaque colonies from building up, preventing damage to the gums, teeth, and bone.

Plaque is a sticky, almost invisible film that forms on the teeth.  It is a growing colony of living bacteria, food debris, and saliva.  The bacteria produce toxins (acids) that cause cavities and irritate and inflame the gums.  Also, when plaque is not removed above and below the gumline, it hardens and turns into calculus (tartar).  This will further irritate and inflame the gums and will also slowly destroy the bone. This is the beginning of periodontal disease.

How to floss properly:

• Take 12-16 inches (30-40cm) of dental floss and wrap it around your middle fingers, leaving about 2 inches (5cm) of floss between the hands.
• Using your thumbs and forefingers to guide the floss, gently insert the floss between teeth using a sawing motion.
• Curve the floss into a “C” shape around each tooth and under the gumline.  Gently move the floss up and down, cleaning the side of each tooth.

Floss holders are recommended if you have difficulty using conventional floss.

Daily flossing will help you keep a healthy, beautiful smile for life!

With many state-of-the-art dental treatments and prevention options available in dentistry today, there are fewer reasons for having to extract (remove) teeth.  When something does go wrong with a tooth, we try to do everything possible to restore the tooth to its original function.  Removing a tooth is the last option because we know that removal may lead to severe and costly dental and cosmetic problems if the tooth is not replaced.

Losing a tooth can be a very traumatic experience and it’s very unfortunate when it does happen.  Injury, accident, fracture, severe dental decay, and gum disease are the major reasons for having to remove a tooth.  If teeth are lost due to injury or have to be removed, it is imperative that they be replaced to avoid cosmetic and dental problems in the future.

When a tooth is lost, the jaw bone that helped support that tooth begins to atrophy, causing the teeth on either side to shift or tip into the open space of the lost tooth.  Also, the tooth above or below the open space will start to move towards the open space because there is no opposing tooth to bite on.  These movements may create problems such as decay, gum disease, excessive wear on certain teeth, and TMJ (jaw joint) problems.  These problems and movements do not result immediately, but will eventually appear, compromising your chewing abilities, the health of your bite, and the beauty of your smile.

Options for replacement of missing teeth:

Removable bridges - This type of bridge is a good solution for replacing one or more missing teeth, especially in complex dental situations where other replacement options are not possible. They are usually made of tooth-colored, artificial teeth combined with metal clasps that hook onto adjacent natural teeth. Removable bridges are the most economical option for replacing missing teeth but might be the least aesthetically pleasing. This is because the metal clasps on the appliances are often impossible to completely conceal.

Fixed bridges - This type of bridge is generally made of porcelain or composite material and is permanently anchored (cemented) to a natural tooth adjacent to the missing tooth site.  The benefit of this type of bridge is that it is fixed (not removable), and it is very sturdy.  The disadvantage is that in order to create a fixed appliance, two healthy, natural teeth will have to be crowned (capped) to hold the bridge in place.

Dentures - This type of tooth replacement is used when most or all of the natural teeth are missing in one dental arch. Dentures are removable artificial teeth that are made to closely resemble the patient’s original teeth.  

Implants - Are a great way to replace one or more missing teeth. They can also provide great support for ill-fitting dentures.  A dental implant is an artificial root that is surgically placed into the jaw bone to replace a missing tooth. An artificial tooth is placed on the implant, giving the appearance and feel of a natural tooth. Implants are very stable, durable, and are the most aesthetically pleasing tooth replacement option.

If you are missing teeth, ask us if they need replacement and what options are available to you. Together we will select the best replacement option for your particular case. Prevention and early treatment are always less involved and less costly than delaying treatment and allowing a serious problem to develop.

Straighter teeth perform chewing, biting, and speaking functions more effectively than crooked teeth.   In addition, a straight smile boosts confidence, is aesthetically pleasing to look at, and can help stave off a wide variety of dental ailments.

There are several types of malocclusion including overbite, underbite, crossbite, and overcrowding.  Each of these alignment problems negatively impacts the functionality and cosmetic appearance of the teeth.

Here is a brief overview of some of the main disorders associated with crooked teeth:

Periodontitis – Periodontitis or gum disease begins with a bacterial infection.  The bacterial infection is caused by inadequate oral hygiene. Crooked teeth are hard to effectively clean, which means that debris, plaque, and bacteria can build up in hard-to-reach areas. Straight teeth are much easier to clean and are at less risk of contracting gum disease.

Temporomandibular Disorder (TMJ) - Crooked teeth can lead to improper jaw alignment, which in turn causes a painful condition known as TMJ. Severe headaches, jaw pain, lockjaw, and grinding of teeth characterize this debilitating disorder. 

Tooth injury – Straight teeth create a strong wall, which means injuries are less likely to occur.  Crooked teeth are weaker and often protrude, making them far more vulnerable to external injury.

Uneven wear – Crooked teeth cause some of the teeth to work harder than others when biting and chewing.  Straight teeth share the workload evenly, meaning less risk of injury and better aesthetics.

Teeth can be straightened using either orthodontic braces or customized aligning trays.  Orthodontic braces are usually affixed to the teeth for a set duration.  The brackets and archwires are tightened regularly by the orthodontist and removed when treatment is complete.  Fixed braces can be placed on the front side or back side of the teeth and are effective for most types of malocclusion.

Aligning trays are fully removable and are used where the malocclusion is less severe, and the teeth need to move a shorter distance.  These trays are replaced every few weeks for the duration of the treatment, and have proven to be equally effective for straightening teeth.

If you have questions about orthodontics and straightening teeth, please contact our office.